Busy Station Callback; Busy Station Camp-On; Calling Your System Operator - Samsung iDCS 500 User Instruction

AUTO ANSWER MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and then automatically answer the call.
• Your microphone and speaker are turned on and you can speak hands-
free. For privacy, use the handset. If you are using a 7B phone you must
pick up the handset to speak to the calling party.
• To finish the call, replace the handset or press the ANS/RLS or the MON-
ITOR key if you are using a 7B phone.

BUSY STATION CALLBACK

When you call another station and receive a busy signal:
• Press the CBK key or dial 44.
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press ANS/RLS to call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds. If you have
set a callback, your CBK key will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press SPK before dialing.

BUSY STATION CAMP-ON

When you call another station and receive a busy signal but you do not want
to wait for a callback:
MANUAL CAMP-ON
• Press the CAMP key or dial 45.
• The called station will receive off-hook ring tone repeated every few sec-
onds and its first available CALL button will flash green to indicate your
call is waiting.
• Wait for the called party to answer.
• The called station must release its first call or place it on hold before an-
swering your camp-on.
NOTES:
1. If you receive No More Calls tone, that station has no available key to ac-
cept your call. Hang up or leave a message.
14
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press SPK before you begin dialing.
AUTO CAMP-ON [L VERSION ONLY]
When you want to automatically camp on to a busy station without pressing
the camp on button every time you call a busy station, you can set your
phone for auto camp-on.
• With the handset on-hook, press TRSF and then dial 110.
• Dial 081 to turn on auto camp-on or 080 to turn it off.
• Press TRSF to store your selection.

CALLING YOUR SYSTEM OPERATOR

• Dial 0 to call your system operator or group of operators.
• If you want to call a specific operator, dial that person's extension num-
ber.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK before you begin dialing.
15