Fujitsu PRIMERGY BX620 S4 User Manual page 85

9
Install the display driver.
1. Insert the PRIMERGY Startup Disc into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the PRIMERGY Startup Disc.
[CD/DVD drive]: \DRIVERS\VIDEO\ES1000\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the installation is completed, eject the PRIMERGY Startup Disc from the CD/
DVD drive and click [Finish] to restart the system.
10
Install the LAN driver.
Install the LAN driver using the PRIMERGY Startup Disc. For details, refer to "4.3 Installing the
LAN Driver" ( pg.89).
11
Install the Fibre Channel Driver.
When the Fibre Channel Expansion Board has been installed, install the Fibre Channel Driver
using the PRIMERGY Startup Disc. For details, refer to "4.4 Installing the Fibre Channel Driver"
( pg.94).
12
Install high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( pg.163) and
install high reliability tools.
13
Perform settings for the RAID management tool (ServerView RAID).
For details, refer to the manual in the Array Controller Document & Tool CD.
For the manual of the SAS RAID Ctrl to be used, refer to "2.3.2 Notes on Configuring RAID"
( pg.42).
• Setting an array administrator account
A Windows user account is required when using ServerView RAID. Create the group "raid-
adm", and create an account with any name for an array administrator in this group.
• Setting the HDD check scheduler
When using the SAS RAID Ctrl (MegaRAID SAS), change the settings for the HDD check
scheduler according to the operation that is required. It is set to 12:00 everyday as default.
The installation of Windows Server 2003 x64 is completed.
Before starting operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( pg.99) and perform
necessary operations.
PRIMERGY BX620 S4 Server Blade User's Guide
85