Fujitsu PRIMERGY BX620 S4 User Manual page 155

• Dynamic link type: "IEEE802.3ad dynamic link aggregation"
7
Click [Finish].
8
Click [OK] to close the property window of the created Teaming adapter.
9
Click [OK] to close the property window of the LAN adapter.
When the Teaming setting is complete, the following virtual adapter will be created.
• "Team: (Team Name)"
Upper protocols will be bound with the main virtual adapter.
They cannot be bound with the LAN card included in a Team.
The IP address can be set in the main virtual adapter.
Deleting a team
When deleting a team, use Intel® PROSet according to the following procedure.
1
Click [Start] – [Administrative Tools] – [Computer Management] to start Intel
PROSet.
2
Click the [Setting] tab, and click [Delete Team].
The confirmation message appears.
3
Click [Yes].
4
Restart the Server Blade.
For Windows Server 2003
Creating a team
Follow the steps below to create a Team.
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Settings] – [Control Panel] – [Intel
®
Intel PROSet.
3
Select a LAN adapter to incorporate in a Team and right-click it.
4
Click [Create New Team] in [Add to Team].
[Teaming Up Wizard] appears.
5
Select a Teaming type with which you want to create a Team.
• AFT type: "Adapter fault tolerance"
• ALB type: "Adaptive load balancing"
• SFT type: "Switch fault tolerance"
PRIMERGY BX620 S4 Server Blade User's Guide
®
PROSet Wired], and start
®
155