Fujitsu PRIMERGY BX620 S4 User Manual page 156

Chapter 5 Operations after OS Installation
• Static link type: "Static link aggregation"
Do not select other team types.
6
Click [Next].
7
Select a LAN adapter to incorporate in a Team and click [Next].
8
Click [Finish].
9
Click [OK] to exit Intel
When the Teaming setting is completed, a virtual adapter "Intel
Virtual Adapter" will appear.
Upper protocols will be bound with this virtual adapter.
You cannot bind them with the LAN card consisting of a Team.
The IP address should be specified in this virtual adapter.
10
Restart the Server Blade.
Deleting a team
Follow the steps below to delete a Team.
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Settings] – [Control Panel] – [Intel
®
Intel PROSet.
3
Select the OS to delete.
4
Click [Delete team].
The confirmation message appears.
5
Click [OK].
6
Click [OK] to exit Intel
7
Restart the Server Blade.
Creating an AFT, ALB, or SFT team in Windows Server 2003 causes a virtual adapter (Intel
Advanced Network Service Virtual Adapter) to be created in [Device Manager], [Network and Dial-up
Connections], or [Network Connection] of the system. However, do not disable or delete the virtual
adapter from [Device Manager], [Network and Dial-up Connections], or [Network Connection]. When
deleting the virtual adapter, make sure to use Intel
156
®
PROSet.
®
PROSet.
®
PROSet.
®
Advanced Network Services
®
PROSet Wired], and start
®