Fujitsu Primergy RX600 S2 User Manual page 37

• Do not store CD-ROMs in areas of high temperature exposed to direct sunlight for many hours or
near heating appliances.
■ Inserting the CD-ROM
1
Make sure the server is turned on and press the CD-ROM eject button.
The CD-ROM tray comes out a little.
2
Pull the CD-ROM tray out.
3
Place the CD-ROM (label side up) onto the tray.
While supporting the CD-ROM tray, push the CD-ROM until it clicks into position.
CD-ROM tray
If the CD-ROM is placed improperly when the tray is pushed into the unit, the CD-ROM or the
drive may be damaged.
Be careful not to touch the lens of the CD-ROM drive.
4
Move the tray back.
Push the tray gently until it clicks into position.
CD-ROM eject button
CD-ROM
PRIMERGY RX600 S2 User's Guide
1
37