Main Menu - Fujitsu Primergy RX600 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.3.2 Main Menu

The [Main] menu is displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured on the [Main] menu.
Main Processor
Set General System Parameters
Bios VersionSHW40.86B.P.04.02.0012
System Data
System Time
Quiet Boot Enable
POST Error Pause
Item
System Date
System Time
Quiet Boot Enable
POST Error Pause
240
BIOS SETUP UTILITY
Memory Devices Server
Main
[MM/DD/YYYY]
[HH/MM/SS]
<Disabled>
<Enabled>
table: Items on the Main Menu
Setting
Present date
Present time
• Enabled
• Disabled（initial
value）
• Enabled（initial
value）
• Disabled
Security Save, Restore & Exit
Current BIOS Version
Esc = Exit
= Move Highlight
Description
Set the system date in [month:day:year] format.
For example, August 20, 2005 is set as "08", "20",
"2005".
Set the system time in [hours:minutes:seconds]
format. The hours should be based on 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
Set the initial screen. The LOGO screen is displayed
at booting when you select "Enabled", and the POST
information is displayed when you select "Disabled".
Set whether or not to stop system booting in case of
POST error.