Memory Board - Fujitsu Primergy RX600 S2 User Manual

Chapter 1 Overview
h PCI Slots
Contains an expansion card. PCI slots (1 to 7) are numbered from bottom to top in the above
figure.
i Real-time clock battery
j SATA connector
k Front Panel connector
l DC Power connectors
m Processor socket
Installs the CPU. Two sockets are installed by default. Up to four sockets can be installed.
n VRM connector (for CPU4)
If you have installed a CPU in CPU Slot 4, install the CPU VRM.
o VRM connector (for CPU3)
If you have installed a CPU in CPU Slot 3, install the CPU VRM.
p VRM connector (for CPU3&4 L3 cache)
The VRM slot for the CPU L3-cache is exclusively used with a CPU of 3.33GHz/8MB. For the
model with CPUs of 3.33GHz/8MB, it is built-in.

1.3.5 Memory Board

"From upper view"
a b c d e
a Mirror Configuration LED (
Green light turns on when the server is in Memory Mirror configuration.
b RAID Configuration LED (
Green light turns on when the server is in RAID Memory configuration.
c Hot plug Attention LED (
Amber light turns on when the Memory Board is in a hot-plug event.
28
f
)
)
)
g