Menu Bar Features; File; Setup; Display - Ioline SmarTrac I/S Series User Manual

Menu Bar Features

The Ioline Control Center provides comprehensive help files to ex-
plain the functions of the software options. Below is a brief summary
Menu Bar items.

File

Send Cut/Plot File
Open Settings File
Save Settings As
Exit

Setup

Plotter Setup
Port Setup

Display

Plotter Settings
Factory Defaults
ROM Version
Memory Buffer
Blade Status

Options

Filtering
HPGL Setting
Install New Firmware

Calibrate

Calibrate Plotter

Test

Serial Test
Computer Port Test
Plotter Port Test

Help

Contents
About
Sends a cut (.PLT) file to the cutter.
Restores saved settings files.
Save settings files.
Exits the Control Center program.
Selects the correct cutter model.
Selects the communications port.
Displays current cutter settings.
Restore original factory settings.
Displays installed ROM version.
Displays installed memory buffer
size.
Displays whether or not the blade
holder is installed.
Toggles Filtering on and off.
Selects an HGPL language.
Installs new firmware on the cutter.
Calibrates the cutter.
Tests serial communications.
Tests the computer port.
Tests the cutter port.
Lists contents of help files.
Provides Control Center version
information.
Chapter 2: Operation 25