Figure 17 The Control Center Main Menu; Changing System Settings - Ioline SmarTrac I/S Series User Manual

24 Ioline SmarTrac User Guide
Figure 17. The Control Center Main Menu.

Changing System Settings

You can adjust many settings with the Control Center to fit your needs:
n Put the cutter in START mode (Green light mode) before
changing system settings. To do so, press the START / STOP
key and make sure the Green light is on before changing any
settings.
n The Screen Menu displays most commonly adjusted param-
eters. The Menu Bar contains utilities and less commonly
adjusted cutter settings.
n Your selected changes take effect only after you press one of
the Send Settings buttons.