Table of Contents
Advertisement
1-2. Connectors and Cables
1-2. Connectors and Cables
1-2-1. Connector Input/Output Signal
The connector input/output signals are as follows.
Rear panel
Input signals (BNC connector : 75 Z)
. SERIAL RET (4 systems)
*1
. SERIAL AUX
. REFERENCE
*1
. RET (4 systems)
. PROMPTER INPUT
*1 : The SERIAL RET/RET/SERIAL AUX signal should be clock-synchronized with the CCU-900/900P or the REFERENCE signal.
Output signals (BNC connector : 75 Z)
. SERIAL OUTPUT (3 systems)
. SERIAL MONITOR OUTPUT
. SERIAL AUX OUTPUT
. PIX (2 systems)
. WF (2 systems)
. PROMPTER OUTPUT
. CHARACTER
. SYNC
. DIGITAL AUDIO
. SS-A, SS-B, SS-C
*2 : When the dual mode is selected and set (in both primary and secondary), the data that is unique to the camera system is inserted.
CAMERA (Optical/electorical connector)
. VIDEO
. RET VIDEO/AUX
. INCOM
. AUDIO
. PGM
. CAMERA COMMAND
1-2 (E)
*1
D1 format serial digital, 270 Mbps
D1 format serial digital, 270 Mbps
40 IRE, VS, sync loop through
140 IRE, VBS or VS
140 IRE, VBS or VS, loop through
D1 format serial digital, SMPTE 259M/ITU-R BT.656
D1 format serial digital, SMPTE 259M/ITU-R BT.656
*2
D1 format serial digital
140 IRE
100 IRE/140 IRE (ENC)
140 IRE
210 mV p-p, 300 mV p-p (sync)
300 mV p-p
AES/EBU format
D1 format serial digital, SMPTE 259M/ITU-R BT.656
Super motion output (when the BKP-9330 is installed)
1.08 Gbps serial
1.08 Gbps serial
2ch
2ch
2ch
CCU-900/900P IMM
Advertisement
Table of Contents
