Matching Connectors And Cables - Sony BVE-700 Installation Manual

1-4. Matching Connectors and Cables

1-4. Matching Connectors and Cables
Use the following connectors, cables, or equivalents when connecting cables to the unit.
Panel indication
Processor unit
PLAYER-1
PLAYER-2
PLAYER-3
RECORDER
MIXER
SWER
Processor unit
EDL
Processor unit
GPI
Processor unit
SDI INPUT
SDI OUTPUT
Processor unit
REF VIDEO
Processor unit/Control panel unit
PANEL
Processor unit
NETWORK
*1 : To use plugs, the following crimp contacts are required.
AWG #18 to #22 : 1-566-493-21
AWG #22 to #24 : 1-564-774-11
AWG #24 to #30 : 1-564-775-11
*2 : Conforms to the IEEE 802.3 Ethernet 10BASE-T/100BASE-TX standards.
*3 : It is recommend to use the 5C-FB coaxial cable of Fujikura America Inc. or Fujikura Europe Ltd.
*4 : It is recommend to use the 5C-2V coaxial cable of Fujikura America Inc. or Fujikura Europe Ltd.
1-4 (E)
Connector name
D-sub 9-pin, Female
D-sub 9-pin, Male
D-sub 15-pin, Female
BNC, 75 Z
BNC, 75 Z
D-sub 25-pin, Female
*2
RJ-45 modular jack
Matching connector and cable
Name Sony part No.
D-sub 9-pin, Male
Connector 9-pin, Male 1-560-651-00
Junction Shell 9-pin 1-561-749-00
D-sub 9-pin, Female
Connector 9-pin, Female 1-563-815-21
Junction Shell 9-pin 1-561-749-00
D-sub 15-pin, Male
Connector 15-pin, Male 1-564-600-11
Junction Shell 15-pin 1-563-376-11
BNC, 75 Z
5C-FB coaxial cable *3
BNC, 75 Z
*4
5C-2V coaxial cable
D-sub 25-pin, Male
Connector 25-pin, Male 1-560-904-11
Junction Shell 25-pin 1-563-377-11
_ _
*1
*1
*1
BVE-700