Sony CCU-900 Installation And Maintenance Manual page 38

2-3. Engineering Menu
DA2 Display
* DA2 *
PIX2 Gain
PIX2 DC
PROMPT Gain
>WFM2 Gain
WFM2 DC
EEPROM Store
Item Setup
PIX2 Gain 0 to 255
PIX2 DC 0 to 255
PROMPT Gain 0 to 255
WFM2 Gain 0 to 255
WFM2 DC 0 to 255
EEPROM Store Rotate the rotary encoder to
move the cursor and press
the rotary encoder twice to
execute.
DA3 Display
* DA3 *
RET IN
> Brightness 00
Contrast 127
Saturation 127
Hue 0
AUX IN
> Brightness 00
Contrast 127
Saturation 127
Hue 0
EEPROM Store
Item Setup
RET IN Setup for A-RET input
Brightness _64 to 63
Contrast 0 to 255
Saturation 0 to 255
Hue _128 to 127
AUX IN Setup for A-AUX input
Brightness _64 to 63
Contrast 0 to 255
Saturation 0 to 255
Hue _128 to 127
EEPROM Store Rotate the rotary encoder to move
the cursor and press the rotary
encoder twice to execute.
*1 : The Hue adjustment menu is displayed only when the system software version is 1.05 or higher. The Hue adjustment itself can be
performed only when the system software version is 1.05 or higher.
2-10 (E)
80
A2
80
80
A2
Function
Adjusts the output signal level of the PIX2 connector.
Adjusts the DC level of the PIX2 connector.
Adjusts the output signal level of the PROMPTER OUTPUT
connector
Sets the output signal level of the WF2 connector.
Adjusts the DC level of the WF2 connector.
Saves the set value in EEPROM of the DPR-69 board.
Function
Brightness adjustment
Contrast adjustment
Saturation adjustment
*1
Hue adjustment
Brightness adjustment
Contrast adjustment
Saturation adjustment
Hue adjustment *1
Saves the set value in EEPROM of the IF-730 board.
CCU-900/900P IMM