Power Cord; Matching Connectors And Cables; Connector Input/Output Signal - Sony HDCU-950 Installation And Maintenance Manual

1-3. Power Cord

1-4. Matching Connectors and Cables

1-3. Power Cord
w
The power cord is not supplied with this unit. Be sure to
use the specified power cord.
Do not use the damaged power cord.
For U.S.A. and Canada
1 Power cord 125 V 10 A (2.4 m) : ! 1-551-812-11
2 Plug holder (black) :
1
For Europe
1 Power cord 250 V 10 A (2.5 m) : ! 1-782-929-11
2 Plug holder (brown) :
1
For Japan
Specified power cord : DK-2401 or equivalent
1 Power cord set (Approx. 2.4 m)
2 Plug holder (brown)
3 Conversion adapter 3P-2P ! 1-793-461-11
c
To avoid an electric shock, be sure to connect the ground
to earth when the conversion adapter 3P-2P specified in
No. 3 of the above illustration, is used.
3
1
1-2 (E)
2-990-242-01
2
AC inlet
3-613-640-01
AC inlet
2
3-613-640-01
2
AC inlet
1-4. Matching Connectors and Cables

1-4-1. Connector Input/Output Signal

BNC Connector
HDCU-950
1125 digital signal
RET (1 to 3) IN : BNC
Conforms to BTA-S004B, 1.485 Gbps/1.4835 Gbps
SMPTE 292M
SERIAL OUT (1 to 2, MONI) : BNC
Conforms to BTA-S004B, 0.8 V p-p, 75 Z, 1.485 Gbps/
1.4835 Gbps
SMPTE 292M
REFERENCE IN : BNC
± 0.3 V, ternary SYNC, 75 Z
Or, black burst signal 0.286 V p-p, 75 Z
SD (525/625) digital signal
RET (1 to 3) IN : BNC
Component serial signal : 270 Mbps
SMPTE 259M
SD SDI OUT (1 to 2) : BNC
Component serial signal : 0.8 V p-p, 75 Z, 270 Mbps
SMPTE 259M
Analog signal
PIX OUT : BNC
1.0 V p-p, 75 Z
WF OUT : BNC
1.0 V p-p, 75 Z
SYNC OUT : BNC
± 0.3 V, ternary SYNC, 75 Z
Or, 0.3 V p-p, SD SYNC, 75 Z selectable
Other
PROMPTER IN : BNC
1.0 V p-p, 75 Z
HDCU-950 IMM