Ring Again - Nortel i2050 User Manual

Using Network Services with the i2004 or i2050 Phone

Ring Again

In busy offices, it can be difficult to reach your party without getting a busy signal.
Ring Again (also known as Automatic Call Back) will notify you when the number
you are trying to call becomes available (see Figure 35).
While on a "busy" call
1. When you hear the "busy signal", press RINGAGN. If the switch allows Ring Again activation
against the remote party, then the line will be released and the feature will be activated.
2. Your display will identify that the Ring Again feature is active. You may cancel the feature by
pressing the CNCLRA softkey.
When the line becomes available, a tone through the speaker will notify you,
prompting action to complete the call.
When You Receive Ring Again Notification
1. To call the remote party, perform one of the following actions: press the CALL softkey, lift the
HANDSET, press the HANDSFREE key, or press a LINE key. The network will connect you
to the party that you have been trying to reach and you will hear the ring back tone.
Figure 35
6135559870
6155555654
Inspect RingAgn
Ring Again active:
6155555654
Inspect 0Calls CnclRa More...
Internet Phone User Guide
6135559870
6135559870
6135559870
10/01 11:20am
Busy...
6135559870
6135559870
6135559870
10/01 11:21am
When your party becomes available
6135559870
6135559870
6135559870
6135559870
10/01 11:40am
6155555654
Ring Again
Call
6135559870
6135559870
6135559870
10/01 11:40am
6135559870
6155555654
Calling...
Inspect Confer Transfr
Nortel Networks
76
Exit