Installing the i2050 Software Phone
Overview of i2050 Installation for IGW Access
Prior to installing the i2050, get answers from your system administrator to the
following questions:
• Does your network use full DHCP? If not, what IP address and port should
you specify for the Communications Server?
• What is your DN Key?
Next, use the following procedure when setting up the i2050 on IGW Access for
the first time:
1. Verify your PC meets the hardware and software requirements of the i2050.
2. Install the USB headset.
3. Install the i2050 softphone using the i2050 Software Phone CD.
4. Run the i2050 Software Phone Configuration Tool. Check the settings on
the following tabs:
- Communications Server
- Select Sound Devices
- Server Type
- Hardware ID
5. Start the i2050. When prompted, enter your DN key.
These steps are explained in more detail on the following pages.
Internet Phone User Guide
28
Nortel Networks