Table of Contents
Advertisement
Disassembly
28
3.
Carefully disengage the hinge from front housing hinge knuckle.
4.
Carefully slide the display flex through the opening in the front housing. Avoid
damage to the display flex (see Figure 13).
Flip Assembly
Figure 13. Removing the Flip Assembly.
5.
To replace, carefully insert the display flex into the opening in the front
housing.
6.
Insert the left side of the hinge into the front housing knuckle and snap the
right side of the hinge into the front housing knuckle.
7.
Replace the keypad, transceiver board, rear housing, antenna battery, and
battery cover as described in the procedures.
October 02, 2006
Hinge Knuckle
Hinge
Front Housing
V323i/V325i
050863o
6809507A01-O
Advertisement
Table of Contents
