Table of Contents
Advertisement
Level 2 Service Manual
6809507A01-O
4.
Carefully use the disassembly tool and gently bend the housing latches
outward starting from the right side of the rear housing to release the four
snaps on the sides of the housing (See Figure 7).
Figure 8. Disconnecting the Housing Latches
5.
When all four snaps have been released, carefully lift the rear housing away
from the phone.
6.
To replace, align rear housing to the phone.
7.
Carefully press the rear housing starting from the left side into the phone until
all of the the snaps engage.
8.
Insert and tighten the four housing screws to a torque setting of 1.5 ± 0.2 in-
lbs. Replace the two screw caps.
9.
Replace the antenna, battery, and battery cover as described in the procedures.
October 02, 2006
Latches
Latches
Disassembly
Disassembly Tool
050878o
23
Advertisement
Table of Contents
