Table of Contents
Advertisement
Level 2 Service Manual
6809507A01-O
4.
Lift the transceiver board away from the rear housing.
Figure 10. Removing the Transceiver Board
5.
To replace, align the transceiver board to the front housing assembly and lower
it into place.
6.
Align the flip assembly flex connector to it's socket on the transceiver PC board.
7.
Firmly and gently press the flex connector onto the socket until the connector
is properly seated.
8.
Replace the rear housing, antenna, battery, and battery cover as described in
the procedures.
October 02, 2006
Transceiver Board
Disassembly Tool
Disassembly
050860o
25
Advertisement
Table of Contents
