Basic Bay Cat X Troubleshooting Steps - Planar Bay Cat X SN-4620-1080 User Manual

5.1 Basic Bay Cat X Troubleshooting Steps

The Bay Cat X is very simple to troubleshoot because there is very little that can malfunction
Do This
Step 1. On the remote, press
Step 2. On the remote, press
Step 3. On the remote, press
twice.
Step 4. Check Power cable is con-
nected and power rocker switch is ON
Do This
Step 1. On the remote, press
.
CURTAIN
Step 2. On the remote, press
twice.
MONITOR
77
If your screen is black
A menu appears
MONITOR
No menu appears
No menu appears and no flashing
lights
. The correct source appears
CURTAIN
The Test Patterns menu appears
MONITOR
Reconnect cable or turn on unit
If your screen is a solid color, but not black
Result
The correct source
appears
The Test Patterns
menu appears
Result
Explanation / Further Action
If the correct source did not appear, go to Step 2.
Check that no test patterns are selected. If a test pattern is
selected, move the selector to None and press
more information, see "Test Patterns" on page 83
If no test pattern was selected, go to Step 3.
Explanation / Further Action
The source is black. On the remote
press to change to different
SOURCE
source
If you know the source is not black, go
to Step 2.
The backlights may not be lit. On the
remote, press O .
N
If the screen is still black, go to Step 2.
Go to Step 4.
If the correct source did not appear, go
to Step 3.
Check that no test patterns are
selected. If a test pattern is selected,
move the selector to None and press
. For more information, see "Test
ENTER
Patterns" on page 83
If none of these steps have resolved
the problem, contact Technical Support
Department.
. For
ENTER