Planar Bay Cat X SN-4620-1080 User Manual page 118

Menu Item
Curtain Pat- When the curtain is put up (via the curtain button on the remote or via RS-232),
tern this is the pattern that is displayed
Auto Codes
When Auto Codes is checked, the Bay Cat X will immediately display the On-Screen codes (red and
amber lights on the screen) if the backlights go out due to a fault, such as "Rear panel open."
Plug and Play This enables the display to give information to a computer graphics card to allow it to automatically con-
figure itself. For more information, see "EDID: What It Is and How It Works" on page 135
Preferred This tells the Bay Cat X which aspect ratio to use when the incoming signal
Source Detec- may have several choices. For instance, 1024x768 and 1366x768 have similar
tion signal timings, and the Bay Cat X might choose the wrong one. If your applica-
tion sometimes has 1024x768 but never 1366x768, set this control for 4x3. For
more information, see "Preferred Source Detection" on page 58
HD Interlaced For static and normal motion images, the Normal setting eliminates twitter. This
Content is the best setting for most images. For quickly moving images, select Rapid to
Motion reduce deinterlacing artifacts and provide a sharper, cleaner image.
Note: this setting only applies to 1080i signals. For more information, see "HD
Interlaced Content Motion" on page 58
111
Miscellaneous Settings
Description Setting(s)
White, Red, Green,
Blue, Black, logo
16x9, 15x9, 5x4, 4x3
Normal, Rapid