Planar Bay Cat X SN-4620-1080 User Manual page 116

Menu Item
Color Temperature
White Balance - All
Red
Green
Blue
Gray Balance - All
Red
Green
Blue
Test Pattern
Hide Menu
Copy to Clipboard
Recall From Clip-
board
Reset to Defaults
109
Color Balance Settings
Description
Adjust the "pure white" of the system to different color
shades
Adjusts the white balance setting of all three colors
simultaneously, keeping them in proportion to each
other, thus keeping the color the same, and adjusting the
brightness of white to match other units in an array
Adjusts each of the colors separately, allowing the user
to change the color of white to match other units in an
array
Adjusts the gamma setting of all three colors simulta-
neously, allowing the user to change the brightness of
gray to match other units in an array
Adjusts the gamma of each of the colors separately,
allowing the user to change the color of gray to match
other units in an array
The four test patterns are the same patterns available
from Main > Diagnostics > Test Patterns but are more
conveniently accessed from this menu when you are
using the remote to color balance units
Use Hide Menu to quickly hide the on-screen menu while you are doing color balancing using a
remote
To compare settings, you can save to the clipboard or recall from the clipboard a range of settings.
This can dramatically speed up the process of performing color balancing. For more information
on color balancing an array of units, see "Adjusting Color Balance" on page 45
Reset all the settings to the factory defaults
Setting(s)
3200°K (Warm), 5500°K, 6500ºK,
8500°K (Cool)
Clipboard
0-100
0-15
Off, White, Gray, Grayscale, Colors