Basic Gx40 Troubleshooting Steps - Planar GX40 User Manual

5.1 Basic GX40 Troubleshooting Steps

The GX40 is very simple to troubleshoot because there is very little that can malfunction
Do This
Step 1. On the remote, press
Step 2. On the remote, press
Step 3. On the remote, press
twice.
Step 4. Check Power cable is con-
nected and power rocker switch is ON
Do This
Step 1. On the remote, press
.
CURTAIN
Step 2. On the remote, press
twice.
MONITOR
73
If your screen is black
A menu appears
MONITOR
No menu appears
No menu appears and no flashing
lights
. The correct source appears
CURTAIN
The Test Patterns menu appears
MONITOR
Reconnect cable or turn on unit
If your screen is a solid color, but not black
Result
The correct source
appears
The Test Patterns
menu appears
Result
The source is black. On the remote
press
source
If you know the source is not black, go
to Step 2.
The backlights may not be lit. On the
remote, press O
If the screen is still black, go to Step 2.
Go to Step 4.
If the correct source did not appear, go
to Step 3.
Check that no test patterns are
selected. If a test pattern is selected,
move the selector to None and press
ENTER
Patterns" on page 79
If none of these steps have resolved
the problem, contact Planar Customer
Service.
Explanation / Further Action
If the correct source did not appear, go to Step 2.
Check that no test patterns are selected. If a test pattern is
selected, move the selector to None and press
more information, see "Test Patterns" on page 79
If no test pattern was selected, go to Step 3.
Explanation / Further Action
to change to different
SOURCE
.
N
. For more information, see "Test
ENTER
. For