System Connections; 625 Connection To A Stereo System - JVC HR-S9400EE Instructions Manual

50
EN
Connection To
A Stereo
System
Mains outlet
AUDIO IN
MAKE CONNECTIONS
1
a– Connect the AUDIO IN L and R on your video recorder
to the audio output connectors on your amplifier.
b– Connect the AUDIO OUT L and R connectors on your
video recorder to the AUX IN or TAPE MONITOR
terminals on your stereo system's receiver or amplifier.
NOTES:
When connecting your recorder's audio output connectors to
a stereo amplifier, make sure you connect L and R correctly.
When listening to sound through the connected stereo system,
turn the TV's volume down completely.
AUX IN or TAPE MONITOR
AV1 IN/OUT
S
IN OUT
AUDIO
AV1 IN/OUT
IN OUT
L L
R R
AV2 IN
AUDIO OUT

SYSTEM CONNECTIONS

These instructions enable you to connect your video recorder to
your Hi-Fi stereo system (if you have one) and listen to the
soundtrack through the stereo.
AUDIO OUT
Speaker
ANT. IN
RF OUT
AV1 OUT
ANT.IN
COMP. Y/C
PAUSE/
R.A.EDIT
Back of Recorder
RF OUT
CAUTIONS:
This recorder has a dynamic range of more than 80 dB with
regards to its Hi-Fi audio capability. It is recommended that
you check the maximum level if you are going to listen to the
Hi-Fi audio signals through a stereo amplifier. A sudden surge
in the input level to the speakers may damage them.
Some speakers and televisions are specially shielded to
prevent television interference. If both are of the non-shielded
type, do not place the speakers adjacent to the TV set as this
can adversely affect the video playback picture.
FM Tuner
CD Player
Stereo Amplifier
I
Television
Speaker
Aerial