Recording; Basic Recording - JVC HR-S9400EE Instructions Manual

22
EN
Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).
Set the REC SYSTEM switch to the appropriate position.
( pg. 27)
• •
• • • •
• • • •
• • • •
• • • •
• • • •
NUMBER
RECORD
RECORD
2
1 2 3
4 5 6
9
7 8
0
4
TV PROG
PLAY
PAUSE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
The TV PROG dial can also be used to select a channel.
SET TAPE SPEED
3
Press
recorder display panel to confirm the selected tape
8
speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
RECORDING
(SP/LP). Check the SP/LP indicator on the
Record safety tab