JVC HR-S9400EE Instructions Manual page 5

If TV has no 21-pin SCART connector:
Connect an optional AV cable between the TV's AV-IN terminals and the AV1 IN/OUT connector on the rear panel of the
recorder via the optional output cable adapter as illustrated.
TV
AV1 IN/OUT
S
IN OUT
AUDIO
AV1 IN/OUT
OUT
IN
L L
R R
AV2 IN
AV1 OUTPUT SIGNAL SELECTION
The AV1 IN/OUT connector accepts only a composite signal (regular video signal), but can deliver either a composite video
signal or a Y/C signal (a signal in which the luminance and chrominance signals are separated) according to the setting of the
rear panel AV1 OUT switch.
If your TV's 21-pin AV input connector (SCART) is compatible only with the regular video signal, set this switch to COMP.
If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set this switch to Y/C. You will better enjoy
high-quality S-VHS pictures.
IMPORTANT:
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.
For switching the TV's mode, refer to the instruction manual of your television.
AV cable
(not provided)
To AV-IN
terminals
AV1 OUT
COMP. Y/C
PAUSE/
R.A.EDIT
AV1 OUT Switch
Output cable adapter (not provided)
To AV1 IN/OUT
connector
TV Aerial Cable (not provided)
RF OUT
ANT.IN
Back of Recorder
EN
Recorder
5