Manual Tracking; Tape Position Indicator - JVC HR-S9400EE Instructions Manual

16
EN
• •
• • • •
• • • •
• • • •
• • • •
• • • •
REVIEW
1
4
REW
PUSH JOG
STOP
2
2 3
5 6
9
7 8
0
4
TV PROG
FF

Manual Tracking

Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG buttons.
8
OVERRIDE AUTOMATIC
TRACKING
1
Press SP/LP (
tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press SP/LP (
matic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.

Tape Position Indicator

The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of "5" in
relation to "0" (beginning) or
"+" (end) shows you where
you are on the tape.
"O.S.D." (
set to "ON", or the indicator
will not appear.
NOTE:
Depending on the type of tape used, there may be times when
the indication is not correct.
3R Picture
Your video recorder is equipped with the 3R Picture System.
During playback, 3R(= Resolution and Response Recovery
technology) maximises sense of resolution and sharpens image
edges to make playback picture look better focused.
PLAYBACK (cont.)
) on the remote to engage manual
) on the remote to re-engage auto-
0
pg. 13) must be
Beginning
3
+ + +
1:23:45
REMAIN 2:35
End