JVC HR-S9400EE Instructions Manual page 25

• •
• • • •
• • • •
• • • •
• • • •
• • • •
Retake
You can cut out unnecessary parts of a TV programme while you're recording it.
ENGAGE RECORD-PAUSE
MODE
1
Press PAUSE during recording.
LOCATE START POINT
2
Turn the JOG dial (or hold down REW or FF) and
release it when you reach the point where you want
to resume recording.
* Your recorder returns to the Record-Pause mode.
8
End of programme
Unnecessary
Programme
part
Go back to end of programme to cut out
unnecessary part
Hi-Fi Audio Recording LEVEL
Control
In most cases, setting the Hi-Fi audio recording level control to
the center position will provide satisfactory results. If necessary,
you can adjust the Hi-Fi audio recording level more precisely
by reffering to the audio level indicator on the front panel.
ADJUST AUDIO RECORDING
LEVEL
1
Turn Hi-Fi REC LEVEL in either direction.
When the level indicator lights up to or near 0dB
with the loudest signal being applied, the recording
level is optimum.
NOTES:
Make sure that the "HI-FI L+R" position is selected with the
AUDIO MONITOR button.
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
Beginning of programme
Unnecessary
part
Recorded part
RESUME RECORDING
3
Press PLAY when you wish to resume recording.
p. 18
Programme
25
EN