Edit To Or From Another Video Recorder - JVC HR-S9400EE Instructions Manual

40
EN
Edit To Or
From Another
Video
Recorder
Set the OUTPUT SYSTEM CONVERTER switch or REC
SYSTEM switch to the appropriate position. (
NUMBER "0"
pg. 26, 27)
2
1 2 3
4 5 6
7 8 9
0
4
TV PROG
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART (AV) connector to
the recorder's 21-pin SCART (AV) connector as
illustrated on page 41.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN or AV1 IN/OUT connector to the
source player.
If you are using another recorder with S-Video and
Audio input/output connectors, you can connect
them to this recorder's S-IN/S-OUT and AUDIO IN/
OUT connectors.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. When using this recorder as the recording
deck, select the appropriate input mode.
The External Input Mode" on page 39.
SET EDIT MODE
3
See "Editing Mode Setting" on page 38.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
Be sure to set "EDIT" back to "OFF" when you finish editing.
( pg. 38)
EDITING (cont.)
"To Select