Safety First; Safety Precautions - JVC HR-S9400EE Instructions Manual

2
EN

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
CAUTION
When you are not using the recorder for a
long period of time, it is recommended that
you disconnect the power cord from the
mains outlet.
Dangerous voltage inside. Refer internal
servicing to qualified service personnel. To
prevent electric shock or fire hazard, remove
the power cord from the mains outlet prior to
connecting or disconnecting any signal lead
or aerial.
This recorder can also receive SECAM colour
television signals for recording and playback.
POWER SYSTEM
This set operates on voltage of AC 220 – 240
V` (Rating), AC 180 – 260 V` (Operating),
50/60 Hz with automatic switching.
625
Cassettes marked "S-VHS" and "VHS" can be used
with this video cassette recorder. However, S-VHS
recordings are possible only with cassettes marked
"S-VHS".
Certain audio features of this product manufac-
tured under a license from Desper Products, Inc.
Spatializer is a trademark owned by Desper
Products, Inc.
S V is a registered trademark of Gemstar
HOW IEW
Development Corporation. The S
is manufactured under licence from Gemstar
Development Corporation.
V system
HOW IEW
IMPORTANT
Please read the various precautions on this
page before installing or operating the
recorder.
It should be noted that it may be unlawful to
re-record pre-recorded tapes, records, or
discs without the consent of the owner of
copyright in the sound or video recording,
broadcast or cable programme and in any
literary, dramatic, musical, or artistic work
embodied therein.
The STANDBY/ON
pletely shut off mains power from the unit, but
switches operating current on and off. "
shows electrical power standby and " " shows
ON.
Video tapes recorded with this video recorder
in the LP (Long Play) mode cannot be played
back on a single-speed video recorder.

SAFETY FIRST

button does not com-
"