Table of Contents
Advertisement
DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
RSSI
CINR
Base station ID
Transmit power
Frequency
Connect
Disconnect
To save the values of the SSID and Diode on modem field, click the Connect button.
The signal level at the input of the modem's receiver.
The relation of the signal level to the noise level. This parameter is
used to measure the quality of the signal.
The identifier of the base station.
The signal level at the output of the modem's receiver.
The frequency of the signal transmitted by the modem's receiver.
Click the button to connect to the WiMAX network. Beforehand,
you need to create a WAN connection with relevant parameters.
The button is displayed when the connection is not established.
Click the button to disconnect from the WiMAX network.
The button is displayed when the connection is established or is
being established.
Page 173 of 202
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
