D-Link User ManualDIR-620 User Manual page 102

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch
Table of Contents

Advertisement

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
MAC
Figure 84. The page for creating a new connection. The IP and Authorization via 802.1x protocol sections.
Parameter
IP Address
Netmask
Gateway IP address
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the router at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
IP
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Page 102 of 202
Configuring via Web-based Interface
Description
Description
) to set the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dir-620

Table of Contents