Table of Contents
Advertisement
DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
IMSI
IMEI
Signal level
Operator name
Mode
PIN
On the USB modem / PIN page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for CDMA USB modems.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Enter button.
The code stored in the SIM card inserted to your USB modem.
The code stored in the memory of the USB modem.
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
When the needed network is available, the name of the operator is
displayed in this field.
A type of the network to which the USB modem is connected (2G or
3G).
Figure 138. The USB modem / PIN page.
Page 170 of 202
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
