D-Link User ManualDIR-620 User Manual page 105

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
MAC
Figure 87. The page for creating a new connection. The IP and Authorization via 802.1x protocol sections.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the router at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
IP
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 105 of 202
Configuring via Web-based Interface
Description
Description
) to set the