Invacare Comet Service Manual page 45

•
Setting the potentiometer to the middle
position:
•
Loosen the bolts (1) on the drive lever
mounting.
•
Twist the potentiometer shaft (2) until the
same resistance (approx. 5kOhm) is
measured between the central connection
cable (3) and both outputs (4).
•
Retighten the bolts on the drive lever
mounting.
• Check settings and repeat the adjustment if
necessary.
•
Reassembly of the operating console takes
place in reverse order
•
Check all functions (trial run).
45