Chevrolet 1980 Light Duty Truck Service Manual page 289

C-MODEL
G-MODEL
Fig. 3C-33~Engine Front Mounting Bracket
FRONT SUSPENSION, FOUR-WHEEL DRIVE
General Description......................................................3C-24
Maintenance and Adjustments....................................3C-25
Ball Joint Adjustment............................................ ..3C-25
Bearing Lubrication............................................... ..3C-26
Wheel Bearing Adjustment.....................................3C-26
Component Replacement........................................... ..3C-27
Hubs, Free-Wheeling (K10, K20, K 3 0 )................3C-27
Spindle..................................................................... ..3C-27
to 80 N*m (60 ft. lbs.) (C-models), 95 N-m (70 ft. lbs.)
(G-models).
Torque to 34 N-m (25 ft. lbs.).
Section 3B.
special washers. Refer to Section 5.
arms. Torque nuts to 17 N-m (150 in. lbs.).
bleeding procedures.
SERIES K10, K20, K30
INDEX
Specifications............................................................... ..3C-37
Special Tools............................................................... ..3C-38
FRONT SUSPENSION
9. Connect front shock absorbers to L.C.A.'s. Torque
10. If equipped, connect front stabilizer to L.C.A.'s.
11. Connect tie rod ends to steering knuckles. Refer to
12. Connect front brake hose to caliper, using new
13. Connect front brake hose clips to upper control
14. Lubricate upper and lower ball joints.
15. Install front wheels.
16. Bleed brake system. Refer to Section 5 for correct
17. Lower vehicle.
18. Connect battery cable.
Steering Knuckle (K10, K 2 0 )................................3C-29
Steering Knuckle (K 30)......................................... .3C-31
Shock Absorber.........................................................3C-32
Stabilizer Bar........................................................... ..3C-32
Leaf Spring.............................................................. ..3C-33
3C-23
LIG H T T R U C K SER V ICE M ANUAL