Fig. 2 D - 5 4 ~ W e d g e and Striker Adjustments
Coach models (06) and utility models (16) use endgates
of similar, yet distinct design. Separate procedures follow
for service on each of these endgates.
ENDGATE ASSEMBLY - (06) MODELS ONLY
Replacement
1.
Lower endgate, and removed hinge access covers.
See figure 2D-57.
ENDGATES (06 AND 16)
2D-58.
disconnect wiring harness.
support cables.
Fig. 2 D -56 ~ W e a th e rs trip ~ R .H . Rear Door
2. Remove endgate-to-hinge bolts.
3. Remove L.H. torque rod bracket, shown in figure
4. If equipped with electric
5. Lift endgate to almost closed position and remove
6. Remove endgate with torque rod.
BODY
2D-21
PRESS
FASTENERS
INTO HOLES
powered window,
LIG H T T R U C K S ER V ICE MANUAL