Lithium Battery; Tools Required; Powering Off The System - Sun Microsystems Sun Blade 100 Service Manual

5.3.5

Lithium Battery

Caution – This system contains a lithium battery, Mitsubishi part number R-2032.
Lithium batteries may explode if mishandled. Do not dispose of a battery in fire. Do
not disassemble a battery or attempt to recharge it.
5.4

Tools Required

The following tools are required to service the Sun Blade 100 system.
No. 2 Phillips screwdriver (magnetized tip suggested)
Needle-nose pliers
Grounding wrist strap
Digital voltage meter (DVM) (Optional)
Antistatic mat
Place ESD-sensitive components such as the motherboard, circuit cards, hard drives,
and NVRAM/TOD on an antistatic mat. The following items can be used as an
antistatic mat:
Bag used to wrap a Sun replacement part
Shipping container used to package a Sun replacement part
Inner side (metal part) of the system cover
Sun ESD mat, part number 250-1088 (available through your Sun sales
representative)
Disposable ESD mat; shipped with replacement parts or optional system features
5.5

Powering Off the System

To power off the system:
Caution – Exit from the operating system before turning off system power. Failure
to do so may result in data loss.
1. Back up system files and data.
If Solaris is running in a windowing environment:
5-4 Sun Blade 100 Service Manual • October 2000