Powering On The System; Figure 9-1 Replacing The System Cover; Figure 9-2 System Power Switch - Sun Microsystems Sun Blade 100 Service Manual

FIGURE 9-1
9.2

Powering On the System

To power on the system:
1. Connect the system power cord to the system and to an AC power outlet.
2. Reconnect and turn on power to any peripherals (so that the system can recognize
the peripherals when it is powered on).
3. Press the front panel power switch (
FIGURE 9-2
4. Verify the following:
9-2 Sun Blade 100 Service Manual • October 2000
Replacing the System Cover
Power switch
System Power Switch
).
FIGURE 9-2