Timescan; Variable-Speed Search/Reverse Motion Playback - JVC HR-DD840U Instructions Manual

36
EN

TimeScan

PLAYBACK AND RECORDING FEATURES (cont.)
q
1 2 3
4 5 6
7 8 9
0
TIME SCAN
Your VCR is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during any of the TimeScan modes (
TimeScan allows you to view a program in search mode while
listening to the audio.
NOTES:
"TIMESCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode (
The audio will not synchronize with the video in TimeScan
modes.
In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. ( pg. 25)
In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
Audio signal during TimeScan
Playback tape
1 2 3 4 5
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Variable-Speed Search/
Reverse Motion Playback
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the VCR's TIME SCAN
SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the
playback speed changes.
(Refer to the chart on pg 37 for playback speeds).
OR
During playback, momentarily press TIME SCAN ™
or £.
To increase the speed in the forward direction, press
£ repeatedly to select the various forward search
modes.
To decrease the speed in the forward direction, press
™.
To play in reverse slow motion, and in reverse play
mode, continue to press ™ after selecting all the
forward slow motion modes.
(Refer to the chart on pg 37 for playback speeds).
To resume normal playback, press PLAY.
pg. 37).
pg. 38).