Timescan - JVC HR-S9700EU Instructions Manual

24
EN

TimeScan

This recorder is equipped with the TimeScan function that allows
noise free pictures on your TV screen in the forward and reverse
search modes. Audio will be played back at normal speed during
TimeScan ( pg. 25). TimeScan also allows you to view a
programme in search mode while listening to the audio.
NOTES:
"TIME SCAN AUDIO" must be set to "ON", or you cannot
hear the sound during TimeScan. (
The audio will not synchronize with the video in TimeScan
modes.
During 1.5x speed TimeScan the audio playback speed will
also be 1.5 times normal, so dialog will sound fast-talking.
During still picture, the sound from the previous 3 seconds
(approx.) will be played back repeatedly (provided there was
at least 6 seconds of normal playback prior to engaging the
pause mode).
During TimeScan some of the audio information will not be
played so that the audio can keep up with the video.
Audio signal during TimeScan
Playback tape
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Activate Variable Speed Search.
w
During playback, press
The more times you press, the faster the playback picture
moves.
To decrease speed, press the button for the opposite direction.
(Refer to the chart on page 25 for playback speeds.)
To resume normal playback, press
If the picture jitters vertically during still picture or variable
speed search with a MESECAM tape:
9
A Press
.
B Press PR + or – so that the vibration stops.
PLAYBACK (cont.)
pg. 71)
e
or .
4
.