Tuner; Set Receivable Channels - JVC HR-DD840U Instructions Manual

12
EN

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
MENU
q
POWER
1 2 3
4 5 6
9
7 8
0
CH
OK
TIME SCAN
INITIAL SETTINGS (cont.)

Set Receivable Channels

TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU as many times as necessary.
ACCESS TUNER SET
SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing CH 5 ∞ or TIME
SCAN 5 ∞, then press OK.
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO
CHANNEL SET" by
pressing CH5 ∞ or TIME
SCAN5 ∞ , then press OK.
Receivable channels in
your area are
automatically assigned to
the CH 5 ∞ buttons, and
non-receivable channels
are skipped.
NOTES:
At the end of Auto
Channel Set, "SCAN
COMPLETED" appears
on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
MAIN MENU
PROGRAM SET
FUNCTION SET
=TUNER SET
CUSTOM SET
AUTO PICTURE
VIDEO STABILIZER
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND
AFC
=AUTO CHANNEL SET
MANUAL CHANNEL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END