Manual; Auto - JVC HR-DD840U Instructions Manual

SELECT TIME ZONE
8
You can select the zone
automatically or manually
by pressing CH
TIME SCAN5 ∞ . If an
incorrect time is displayed
you may be receiving the
clock setting data of a PBS
channel from an adjacent
time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" in step 7 select "MANUAL" and select
the correct time zone manually.
If you selected "AUTO", press MENU to return to the
Semi-Auto Clock Set screen.
If you selected
"MANUAL", press OK
and the screen to the
right appears. Move the
highlight bar (arrow) to
your choice by pressing
CH or TIME
SCAN 5 ∞, then press
MENU twice to return to
the Semi-Auto Clock Set screen.
SELECT D.S.T. MODE
9
You have three choices:
a–Select "AUTO" and the
adjustment to your VCR's
clock will be made
according to the incoming
signal from the host
channel.
b–Select "ON" and the
adjustment will be made
based on the clock itself.
c–Select "OFF" if Daylight Saving Time doesn't apply to
you.
Move the highlight bar (arrow) to your choice by
pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press MENU
and the Semi-Auto Clock Set screen reappears.
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel when
the clock is being set. The current time will appear
automatically when the clock is set.
TIME ZONE SELECT
or

=AUTO

MANUAL

PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
TIME ZONE SELECT
=ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
D.S.T. SELECT
=AUTO
ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
Manual
SELECT MODE
5
At the Override Auto Clock Set screen (
the highlight bar (arrow) to "MANUAL CLOCK SET" by
or TIME SCAN 5 ∞, then press OK.
pressing CH
SET DATE, TIME AND D.S.T.
6
The Manual Clock Set
screen is displayed and the
month digit begins
blinking. Press the
appropriate NUMBER keys
to set the date and time (if
only 1 digit, press "0" first).
Press CH or TIME
SCAN 5 ∞ to set AM/PM
and D.S.T. (Daylight Saving Time). Press OK after AM/
PM and D.S.T. settings.
Set D.S.T. to "ON" to set the D.S.T. according to the
VCR's clock or to "OFF" if D.S.T. doesn't apply to you.
When you're finished with this set-up procedure, press
MENU to start the clock.
NOTES:
and TIME SCAN 5 ∞ can be used to perform
CH
all operations. (In this case, press OK after each
setting.)
At the Manual Clock Set screen, the setting that can
be set blinks. When setting of a highlighted item is
completed, the highlight bar moves down by 1 line to
the next item.
MAKE CORRECTIONS
7
To change any of the settings, press OK or TIME SCAN
until the item you want to change blinks, then set
as in step 6.
Auto
SELECT MODE
5
At the Override Auto Clock Set screen, move the
highlight bar (arrow) to "AUTO CLOCK SET" by
or TIME SCAN5 ∞ , then power off the
pressing CH
VCR. Do not power it on again until the clock has been
adjusted. After the clock is set it will be automatically
adjusted on the hour except at 11:00 PM, midnight,
1:00 AM and 2:00 AM. (The clock will be adjusted on
the hour based on the time displayed on the VCR, not
on the actual real time.)
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
11
EN
pg. 10), move
MANUAL CLOCK SET
DATE 1/ 1/97 WED
TIME – –:– – AM
D.S.T. ON
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END