Sent Fax Quality Is Poor; Faxes Are Sent At The Wrong Size; Received Fax Quality Is Poor - Epson WF-2660 User Manual

User's Guide
❏ Even though the memory is full, you can send a monochrome fax by using the Direct Send feature. Or divide
your originals into two or more to send them in several batches.
❏ If the printer cannot print a received fax due to a printer error, such as a paper jam, the memory full error may
occur. Solve the printer problem, and then contact the sender and ask them to send the fax again.
Related Information
"Saving Received Faxes" on page 78
&
"Checking the Received Faxes on the LCD Screen" on page 79
&
"Fax Mode" on page 19
&
"Removing Jammed Paper" on page 111
&
"Replacing Ink Cartridges" on page 82
&

Sent Fax Quality Is Poor

❏ Clean the scanner glass and the document cover.
❏ Clean the roller in the ADF.
❏ Change the Resolution setting on the control panel. If your originals contain both text and photos, select
Photo.
❏ Change the Density setting on the control panel.
❏ Enable the ECM setting on the control panel.
Related Information
"Fax Mode" on page 19
&
"Fax Settings" on page 23
&
"Cleaning the Scanner Glass" on page 97
&
"Cleaning the ADF" on page 95
&

Faxes Are Sent at the Wrong Size

❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
Related Information
"Fax Mode" on page 19
&
"Placing Originals" on page 33
&
"Cleaning the Scanner Glass" on page 97
&

Received Fax Quality Is Poor

❏ Enable the ECM setting on the control panel.
❏ Contact the sender and ask them to send at a higher quality mode.
Solving Problems
131