Power And Control Panel Problems; Power Does Not Turn On; Power Does Not Turn Off; Lcd Screen Gets Dark - Epson WF-2660 User Manual

User's Guide
❏ Clean the inside of the ADF.
❏ Do not load above the line just under the
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
"Available Originals for the ADF" on page 33
&
"Placing Originals on the ADF" on page 33
&
"Cleaning the ADF" on page 95
&

Power and Control Panel Problems

Power Does Not Turn On

❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.

Power Does Not Turn Off

P
Hold down the button for a little longer. If you still cannot turn off the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it off by pressing the

LCD Screen Gets Dark

The printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.

Printer Does Not Print

Check the following if the printer does not operate or prints nothing.
❏ Connect the interface cable securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you are using the printer over a network, make sure the printer is connected to the network. You can check
the status by checking the indicators on the control panel or by printing the network status sheet. If the printer
is not connected to the network, see the Network Guide.
❏ If you are printing a large image, the computer may not have enough memory. Print the image at a lower
resolution or a smaller size.
Solving Problems
d
symbol inside the ADF edge guide.
119
P
button.