Epson WF-2660 User Manual page 56

User's Guide
Related Information
"Epson Connect Service" on page 99
&
Printing by Touching Smart Devices to the NFC Tag
Even if the printer and your smart device are not connected, you can connect them automatically and print by
touching the NFC antenna of a smart device running Android 4.0 or later and that supports NFC (Near Filed
Communication) to the printer's NFC tag.
The location of the NFC antenna varies depending on the smart device. See the documentation provided with your
smart device for more details.
Important:
c
❏ Make sure that Wi-Fi Direct Simple AP mode is running. See the Network Guide for more details.
❏ Make sure that Epson iPrint is installed on your smart device. If not, touch the NFC tag antenna of the smart
device to the printer's NFC tag and install it.
Note:
❏ If the printer does not communicate with the smart device even after touching it to the tag, try adjusting the position of
the smart device and touch it to the tag again.
❏ If there are obstacles such as metal between the printer's NFC tag and the NFC antenna of the smart device, the printer
may not be able to communicate with the smart device.
❏ This feature uses Wi-Fi Direct Simple AP mode to connect to the printer. You can connect up to four devices to the printer
at the same time. See the Network Guide for more details.
1. Load paper in the printer.
2. Touch the NFC antenna of your smart device to the printer's NFC tag.
Epson iPrint starts.
3. On the Epson iPrint home screen, touch the NFC antenna of your smart device to the printer's NFC tag again.
The printer and the smart device are connected.
4. Display the image you want to print.
5. Touch the NFC antenna of your smart device to the printer's NFC tag again.
Printing starts.
Printing
56