Advertisement
Installation Guide
Programming Overview
Program mode allows you to adjust the settings and options of your system. The system's default
settings do not require any program changes in most cases. However, this system does incorporate
a highly advanced programming system that includes 5 menus with numerous options and settings
that can be easily adjusted for custom installations.
User Settings - Page 8.
This menu contains settings that adjust the way the system operates for the user.
Additional Settings - Page 8.
This menu contains additions settings
Starter Settings - Page 9
This menu controls features and settings associated with remote car starter applications.
Tach Settings - Page 10
This menu allows the programming and adjustment of the Tach Signal
Auxiliary Output - Page 11
This menu contain the settings for the Auxiliary Outputs of the system.
Entering Program Mode
To Enter Program Mode
1) Make sure ignition is in the off position.
2) Within three seconds turn the key ON - OFF - ON - OFF - ON. Leave "ON"
3) Press and release the Program Button on the antenna 1 time.
4) Park lights will come on and the horn will honk to confirm entering program mode.
5) Select Desired Program Menu by the following:
Press Button #1
Press Button #2
Press Button #3
Press Button #4
Press Button #5
6) The selected mode will be confirmed by a horn honk and one park light flash.
7) The program menu may be changed at any time by pressing the transmitter buttons
as above, this allows the installer to change a setting from one menu, then move to
Another menu and change another setting without re-entering the Program Mode.
8) Turning off the ignition or 30 seconds of no activity will exit the Program Mode.
Changing the Programmable Settings
To Select and Change A Program Setting:
1) Enter Program Mode.
2) Select the desired Program Menu. (See pages 8 through 11.)
3) Press & release the Program Button the correct number of times to select the desired
Program Setting(as listed on pages 8 through 11.) The park lights will flash and the horn
(optional) will honk to indicate the current setting that is selected.
4) Press and hold the Program Button until the parking lights / horn confirm the selected setting.
The park lights will flash and the horn will honk to indicate the option selected within the setting.
SYSTEM RESET
1) - Within 3 seconds turn the ignition key ON-OFF-ON-OFF-ON (Leaving the Key ON).
2) - Press and release the Program Button.
3) - The park lights will come ON
4) - Quickly press and hold the Program Button a second time for 8 Seconds. The park lights will
Flash and the horn (Option) will honk three times.
The System Is Now Re-Set To Factory Defaults.
Programming Introduction
Lock
User Options
Unlock
Additional Settings
Start
Remote Start Options
#
Tach Adjustment Menu
Aux
Advanced Auxiliary Control
See Page 8.
See Page 8.
See Page 9
See Page 10.
See Page 11.
7
Advertisement
