Specifi Cations - Follett C/E25CT400A/W-S Installation, Operation And Service Manual

Specifi cations

Electrical
1. Models with Satellite-fi ll icemakers (C/E25CR400A/W, C/E50CR400A/W, C/E25HR400A/W,
C/E50HR400A/W)
Basic electrical: 220V 60Hz/230V 50Hz
2. Freestanding models and models with integral icemakers (C/E25FB400A/W, C/E50FB400A/W,
C/E25CT400A/W, C/E50CT400A/W, C/E25HT400A/W, C/E50HT400A/W)
Basic electrical: 220V 60Hz/230V 50Hz
3. Dispensers and Satellite-fi ll icemakers are supplied with a 2m (7ft) power cord.
Ambient
Air temp
Water temp
Water pressure
Plumbing
1
Dispenser drain
1
Icemaker drain
2
Dispenser water inlet
2
Satellite-fi ll IM water inlet
Cond. '' – w/c only
Cond. drain – w/c only
Note: Water shut-off recommended within 3m (10 feet) of dispenser. Drain to be hard piped and insulated, and
maintain slope of at least 20mm per 1m run (1/4" per foot) of slope. All plumbing connections must be made in
accordance with local building codes.
Ventilation clearances
Countertop and wall mount models with Satellite-fi ll icemaker (C/E25CR400A/W, C/E50CR400A/W,
C/E25HR400A/W, C/E50HR400A/W) — none. 305mm (12") at top advised for service.
Countertop and wall mount models with integral icemaker (C/E25CT400A/W, C/E50CT400A/W,
C/E25HT400A/W, C/E50HT400A/W) — 153mm (6") at top. 153mm (6") each side advised for service.
Freestanding models (C/E25FB400A/W, C/E50FB400A/W) — 102mm (4") at rear. 305mm (12") at top advised for
service.
1 Includes adapter kit to 3/4" barb fi tting and 6' 3/4" ID vinyl tube
2 Includes adapter kit – 6' 3/8" OD tubing and adapter to 1/2" BSP
38 C/100 F max.
32 C/90 F max.
4.8 bar/70 P.S.I. max.
25/50C with 25/50H with
Satellite-fi ll Satellite-fi ll
icemaker icemaker
3/4" FPT 3/4" ID tubing
3/4" MPT 3/4 MPT
3/8" push-in 3/8" push-in
3/8" push-in 3/8" push-in
3/8" FPT 3/8" FPT
3/8" FPT 3/8" FPT
Icemaker
5 amps
Total system
6.5 amps
10 C/50 F min. (best performance below 27 C/80 F)
4 C/40 F min. (best performance below 21 C/7 F)
.69 bar/10 P.S.I. min.
25/50C with
integral
icemaker
3/4" FPT
–
3/8" push-in
–
3/8" FPT
3/8" FPT
5
Dispenser
1.5 amps
25/50H with 25/50FB
integral icemaker
icemaker in base
3/4" ID tubing 3/4" FPT
– 3/4" MPT
3/8" push-in 3/8" push-in
–
3/8" FPT 3/8" FPT
3/8" FPT 3/8" FPT
–