Before You Begin - Follett C/E25CT400A/W-S Installation, Operation And Service Manual

Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and
outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask
that you review the installation portion of this manual before beginning to install the unit. Our instructions are
designed to help you achieve a trouble-free installation. Should you have any questions or require technical help
at any time, please call our technical service group toll free at (877) 612-5086 or +1 (610) 252-7301.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage.
If damage is found, notify your shipper immediately and contact Follett Corporation for help in fi ling a claim,
if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett equipment. Following is an explanation of model numbers.
E50CT400A-L
!
Important cautions
• Do NOT tilt any unit farther than 30° off vertical plane during uncrating or installation
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at
all times. If access to this area is required, power to unit must be disconnected fi rst.
• Follett recommends installation of a Follett FL4S water fi lter system (part# 00130229) in icemaker
inlet water line
• Prior to operation clean and sanitize the dispenser in accordance with instructions found in this
manual
• Ice is slippery. Be sure counters and fl oors around dispenser are clean, dry and free of ice.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
• Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstructions
• Do NOT use mechanical devices or other means to accelerate the defrosting process
• To avoid a hazard due to instability of the appliance it must be fi xed according to instructions
• The appliance must be positioned so the plug is accessible
• If the cord is damaged it must be replaced by a special service agent
L = Lever dispensing, S = SensorSAFE infrared dispensing
Condenser type – A = air-cooled, W = water-cooled
Icemaker capacity and refrigerant – 400 = 181 kg (400lbs)/day, R404A refrigerant
Icemaker location – R = Satellite-fi ll icemaker, T = integral icemaker in top of cabinet,
B = icemaker in base of freestanding units
Dispenser confi guration – C = countertop, H = wall mount, F = freestanding
Approximate storage capacity in lbs
Alternate voltage – C = 220V 60Hz
– E = 230V 50Hz
4