Specifi Cations - Follett 25 Installation, Operation And Service Manual

Specifi cations

Electrical
1. Models with RIDE ice machines (25CR400A/W, 50CR400A/W, 25HR400A/W, 50HR400A/W)
Basic electrical: 115 V/60 Hz/1 phase
2. Freestanding models and models with integral ice machines (25FB400A/W, 50FB400A/W,
25CT400A/W, 50CT400A/W, 25HT400A/W, 50HT400A/W)
Basic electrical: 115V/60Hz/1 phase
3. Dispensers and RIDE ice machines are supplied with 7-foot power cord with NEMA 5-20 hospital grade
plug. Connect to 20A circuit fuse or breaker.
Note: It is preferred that circuit be protected by a GFCI.
Ambient
Air temp
Water temp
Water pressure
Plumbing
Dispenser drain
Ice machine drain
Dispenser water inlet
RIDE IM water inlet
Cond. inlet – w/c only
Cond. drain – w/c only
Note: Water shut-off recommended within 10 feet (3 m) of dispenser. Drain to be hard piped and insulated, and maintain
slope of at least 1/4" per foot (6 mm per 30.4 cm run) of slope. All plumbing connections must be made in accordance
with local building codes.
Ventilation clearances
Countertop and wall mount models with RIDE ice machine (25CR400A/W, 50CR400A/W, 25HR400A/W, 50HR400A/W)
— none. 12" (305 mm) at top advised for service.
Countertop and wall mount models with integral ice machine (25CT400A/W, 50CT400A/W, 25HT400A/W,
50HT400A/W) — 6" (153 mm) at top. 6" (153 mm) each side advised for service.
Freestanding models (25FB400A/W, 50FB400A/W) — 4" (102 mm) at rear. 12" (305 mm) at top advised
for service.
4
Ice machine
11.0A
Total system
14.0A
+100 F/+38 C max. +50 F/+10 C min. (best performance below +80 F/+27 C)
+90 F/+32 C max. +40 F/+4 C min. (best performance below +70 F/+21 C)
70 P.S.I. max.
25/50 CR with 25/50 HR with
RIDE RIDE
ice machine ice machine
3/4" FPT 3/4" ID tubing
3/4" MPT 3/4 MPT
3/8" FPT 3/8" FPT
3/8" OD push-in 3/8" OD push-in
3/8" FPT 3/8" FPT
3/8" FPT 3/8" FPT
Max. fuse Dispenser
20A 4.0A
Max. fuse
20A
10 P.S.I. min.
25/50 CT with
integral
ice machine
3/4" FPT
–
3/8" FPT
–
3/8" FPT
3/8" FPT
25CT/HT/CR/HR/FB and 50CT/HT/CR/HR/FB
Max. fuse
20A
25/50 HT with 25/50 FB
integral ice machine
ice machine in base
3/4" ID tubing 3/4" FPT
– 3/4" MPT
3/8" FPT 3/8" FPT
– –
3/8" FPT 3/8" FPT
3/8" FPT 3/8" FPT