Table of Contents
Advertisement
Delay 4 Sec
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep/suspend state. Available options are:
Single LED The power LED turns off during the sleep/suspend mode.
Dual LED
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears.
USB Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Master,
Resume On PME#/Ring
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Note: To use the function of "Resume On Ring" , you need to install
a modem card supporting power on function.
Resume On RTC Alarm
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date.
off button.
When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer
is turned off.
The power LED changes its color to indicate the sleep/
suspend state.
3-23
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
